|
Low Voltage |
| Connections |
Continuity: 1-100 Ω : +/-
1 ohm, 100 Ω - 500K Ω : +/- 1%, 500K Ω - 2M Ω : +/- 5%
Shorts: 1Kohm - 2MΩ (± 20%) |
| Components |
Diodes: Checks for proper orientation
Resistors: 1-100 Ω : +/- 1 ohm, 100 Ω - 500K Ω : +/- 1%, 500K Ω - 2M Ω : +/-
5%
Capacitors: 100pF to 500uF (± 5% to 20% based on capacitor type, ±10pF)
|
| Relay Testing |
Capable of active relay testing |
| Test Voltage |
14 VDC maximum (Automatically selected
by the NX Tester) |
| Test Current |
5mA DC (Automatically selected by the
NX Tester) |
| Test Speed |
1 seconds per 1024 test points
(continuity only)
3 seconds per 1024 test points (continuity and shorts) |
|
High Voltage |
| Hipot Range |
50 – 1500VDC |
| Insulation Resistance Range |
5 MΩ– 1 GΩ(± 10%) |
|
General |
| Audible Tones |
Provides a variety of user
programmable tones for error notification and special events. |
| Program Storage |
1.3Mb of capacity with no file
quantity limitation. |
| Control Port |
24 control port capability (additional
hardware required) |
| Serial Ports |
TTwo RS-232 ports (optional two
additional RS-232 ports) |
| Test Point Interface |
Din Connector (96 Position, 32 Loaded) |
| Input Power |
100 – 240VAC, 50-60Hz external power
supply (30W Hipot, 60W Hipot+) Power supply provides 15VDC to the NX Tester |
| Test Point Capacity |
NX Hipot: 64 - 128 test points
NX Hipot+: 64 - 1024 test points
|
| Size (W x D x H) |
NX Hipot: 10.7” x 7.5” x 3.8” (27.2 cm
x 19.0 cm x 9.7 cm)
NX Hipot+ Display Unit: 10.7” x 2” x 3.8” (27.2 cm x 5.1 cm x 9.7 cm)
NX Hipot+ Base Unit: 9.5” x 6.4” x 8.6” (24.2 cm x 16.3 cm x 21.9 cm)NX
Hipot+ Expansion Unit: 9.5” x 6.4” x 6.1” (24.2 cm x 16.3 cm x 15.5 cm) |
| Weight |
NX Hipot: 7.4 lbs (3.4 Kg)
NX Hipot+ Display Unit: 2.5 lbs (1.2 Kg)
NX Hipot+ Base Unit: 13.8 lbs (6.3 Kg)NX Hipot+ Expansion Unit: 9.8 lbs (4.5
Kg) |
| Operating Temperature |
40 – 100 degrees F (4 – 38 degrees
Celsius) |
| Warranty |
One year parts and labor |
| |
|
