back

Clearance and Second User Equipment

Visit

Clearance and Second User Equipment Leadmaker currently stock a large range of clearance and second user equipment available at great prices.

back

Fully Automatic Cut Strip & Terminate

Visit

List of available Wirmec fully automatic crimp to crimp machines. Each of the machines can be configured to suit a wide variety of process types depending on the customers requirements.

back

Wire Cutting and Stripping Machines

Visit

Automatic Cut & Strip Machines These machines measure, cut and strip a large range of wire sizes automatically. A wire is fed in on a reel and is produced to the programmed length. Please click to see our range.

back

Semi Automatic Wire Stripping

Visit

back

Mecal Bench Crimping Presses

Visit

back

Mecal Wire Crimping Applicators

Visit

back

Ulmer Cutting Machines

Visit

Ulmer manufacture high quality industrial cutting machines that are built to last. They can be used to cut a wide range of materials including: PVC hoses, textile tubes, rubber, cable, ribbon cables, wire, strands, ropes, felt materials, foils, textiles, leather, materials of the medical field and diverse other material can be processed.

back

Ulmer Pre-feeders

Visit

Ulmer heavy duty pre-feeders for pulling cable of a mounted reel. Capable of pulling reels of up to 300kg, these also feature a slack protection tower that can be added for smoother operation.

back

Z+F Ferrule Crimpers/Processing

Visit

back

Die Sets

Visit

Die sets can be used with a range of loose piece crimping applications. Leadmaker Services supply the full range of Wezag (WDT) die sets. Please view our brochure for your requirements.

back

Machine blades by Mechtrix

Visit

We are pleased to announce we now offer the entire catalogue of Mechtrix blades for cable processing equipment including Komax, Schleuniger, Artos, Kodera and many many more. Custom blades can be manufactured to specification with short lead times and reliable consistent results. With over 40 years of experience and knowledge in the industry, Mechtrix have dealt with leading companies providing them with exceptional service and standards.

back

Komax belts by Bervina

Visit

Bervina timing belts are molded from thermoset polyurethane, applying centrifugal casting. All products are one piece molded without joint, consists of steel, kevlar, inox, polyester or fiber glass reinforcement. We offer a large selection of tooth profiles and lengths for different applications. We design and produce tooling for new applications in house. We produce cast timing belts in the length range of 150mm – 1500mm, available hardness of the material is between 10-90 ShA. Heat resistance is between 80 – 200 °C On demand it is possible to deliver belts in different colours. According to the field of use we can design cleats onto the backside of the belt. These cleats are made by casting process so the belt is one piece molded, in this way the life span is extended.

back

Blades & Consumables

Visit

Complete range of blades for all Komax equipment.

back

Machine Spares

Visit

Machines can break, we know this. With over 30 years experience in the field and in our workshop carrying out repairs, we have a vast knowledge of key parts that fail and common issues that can occur with most equipment. Leadmaker Services stock common spare parts for a wide variety of cable processing equipment including cut and strip machines, crimping presses, fully automatic machines and more.

back

Crimp Pull Testing

Visit

Mecal Evolution Crimping Miniapplicator

Our best selling applicators – the Mecal Evolution miniapplicator from Mecal will suit most standard side and rear feed terminals, typically up to 6mm². A special tool is also available for certain terminals such as central carrier strip and double carrier strip versions of terminal.

The Mecal Evolution miniapplicator can also be customized for use in different situations, such as in automatic machines where the carrier strip should not be cut or where a higher degree of crimp height adjustment is required.

This Mecal Evolution miniapplicator from Mecal will suit most standard side and rear feed terminals, typically up to 6mm². A special tool is also available for certain terminals such as central carrier strip and double carrier strip versions of terminal.

The Mecal Evolution miniapplicator can also be customized for use in different situations, such as in automatic machines where the carrier strip should not be cut or where a higher degree of crimp height adjustment is required.

A brand new style of tool
Extremely competitive price
Usual Mecal quality and reliability
Mechanical feeding only
Pad setting or continuous regulation
Non-resettable 7 digit counter
Pre-feed & Post feed cams supplied
For Auto or bench applications
Comprehensive operators manual
Capability studies available
Cross sectional pictures of crimp available
Anvil can be replaced without removing tool from press
2 part anvil means only the worn part gets changed
Thicker base plate – more rigid
Crimpers can be replaced without removal of the ram from the tool or the tool from the press
User friendly terminal pitch and position adjustment
Produced under a quality Management System certified to ISO 9001 (TÜV).

For a suitable Bench press, please click here.

Crimping
There are no documents for this product yet.