| TEL +44
(0)1489 890761 |
| FAX +44
(0)8704 603348 |
CRIMP
APPLICATORS FROM £695.00
CRIMP PULL
TESTERS FROM £795.00
CABLE TIE GUNS & TIE WRAP GUNS FROM £14.95
INDUSTRIAL
ELECTRIC & PNEUMATIC SCREWDRIVERS
| |
|
MECAL
SPECIAL
APPLICATORS |
UP |
|
MYLAR TAPED PRE-INSULATED TERMINALS |
|
 |
  |
| |
|
The pneumatic MRSP "Mylar Tape"
restyling mini applicator will accept the SC12 stripper crimper in a
semi-automatic configuration. In fact the mylar tape, after the crimping, is
removed from the operating area of the stripper crimper. |
|
| |
|
SPECIAL APPLICATIONS WITH FLC (FLAT LAMINATED CABLE) |
1
2
3
4
5 |
|
|
|
1
The Duo Twin Star Crimp is a
semi-automatic machine conceived to put Modupack terminals on the end of a
flat - laminated - cable (FLC), featuring a minimum of 3 to a maximum 13
tracks. The terminals are crimped to the FLC by means of a "star crimp"
crimping. |
|
2
The Shunt Tool is an applicator,
to be used in a manual configuration, conceived to put "splice " contacts on
a Flat - Laminated - cable (FLC), featuring a minimum 3 to a maximum of 13
tracks, to create bridges. The contacts are crimped to the FLC by means of a
"star crimp" crimping. |
|
3
The Splice Automatic Crimping is
a semi-automatic machine conceived to put "splice" contacts on a flat
laminated cable (FLC), featuring a minimum of 3 to a maximum of 13 tracks,
to create bridges. The contacts are crimped to the FLC by means of a "star
crimp" crimping. |
|
4
Restyling mini applicator with
optic fiber zeroing system for Molex terminal MOX 0,635. The optic fibre
zeroing system allows the crimping system to lock on the conducting track.
Must be coupled to a controlled axis positioning system for the FLC. |
|
5
The STC105 is an automatic
machine conceived to put modupack connectors on a flat - laminated - cable (FLC),
featuring a minimum 2 to a maximum of 12 tracks. The STC 105 can also be
used in a semi-automatic mode. The connectors are crimped to the FLC by
means of a "star crimp" crimping. |
|
|
| |
|
IDC APPLICATIONS |
1
2 |
| |
|
1
Restyling mini applicator for
IDC contacts Tyco 284128 - 284127 - 284126. Featuring a side-loader, this
special pneumatic applicator can hold a high number of IDC contacts Tyco
284128 - 284127 - 284126. The contacts can can have a different number of
tracks, because a mechanical "reading" system allows the applicator to
detect the pitch change. |
|
2
Featuring a side - loader, this
special pneumatic applicator will hold a high number of IDC connectors
Stocko RAST 2,5 MFMP 7238. The connectors can have a different number of
tracks, because a mechanical "reading" system allows the applicator to see
the pitch change. Can be radidly adapted to the IDC connector Stocko 2,5 PRO
MFMP 7260, thath has a bigger pitch and wire sction. |
| |
|
| |
|
ASIAN STYLE APPLICATORS |
1
2
3 |
| |
|
1
ESJ - EFJ mini applicator
for Asian-style presses. This Toyo-style applicator features a coupling
compatible with the Asian-style Jam presses, has a crimping height at the
Bottom Dead Center of 121 mm, 30 mm stroke, max terminal pitch 27 mm, max
terminal thickness 0.6 mm, mechanical feeding system (both end & side feed),
weight 3.0 kg (6.6 lbs), width 66 mm (2.59"), height 118 mm (4.6"), depth
190 mm (7.48"). |
|
2
ESY - EFY Evolution special mini applicator. This special Evolution
applicator has been conceived to be compatible with the type of press used
by one of the largest wire-harness makers in the world. It has a crimping
height of 190 mm at Bottom Dead Center, 35 mm stroke, max terminal pitch: 27
mm (mechanical feeding), max terminal thickness 0,6 mm, max wire section 6
mmq, weight 3.0 kg (6.6 lbs), width 66 mm (2.59"), height 185 mm (7.3"),
depth 190 mm (7.48"). |
|
3
RSY - RFY Restyling
special mini applicator. This special Restyling applicator has been
conceived to be compatible with the type of press used by one of the largest
wire-harness makers in the world. It has a crimping height of 190 mm at
Bottom Dead Center, 35 mm stroke, max terminal pitch: 27 mm (mechanical
feeding) or 35 mm (pneumatic feeding), max terminal thickness 1.2 mm, max
wire section 10 mmq, weight 3.9 kg (8.6 lbs), width 66 mm (2.59"), height
185 mm (7.3"), depth 190 mm (7.48"). |
|
|
