A range of Mecal Applicators New from Leadmaker Services Jacket stripping machines A range of Mecal Presses

Home

Products
Services
Spare Parts Lists
Second User
About Us
News
Links
Contact Us

TEL +44 (0)1489 890761
FAX +44 (0)8704 603348

Link to Mecal Products

UK Agents for Mecal

Crimp Applicators, Crimp Tools, Crimping Presses, Stripper Crimpers, Crimp Pull Testers


Link to Cosmic Products

UK Agents for MCM Cosmic

Wire Strippers, Strip & Twist Machines, Jacket Strippers, Coax Cable Strippers


Agents for Kodera

Cut & Strip Machines, Cut, Strip & Terminate machines & Spares for all Kodera Equipment


New Dynalab Harness Testers & Hi Pot High Voltage Testers


Agents for Ulmer

Cable & Tube Cutting, Cable Prefeeders, Dereelers, Stacking Systems


Agents for Loepfe

Hot Foil & Hot Stamp Wire Marking Machines


Wire Size Conversion Table


Low Cost Miniapplicators

Crimp Applicators


Crimp Pull Testers from GBP£840.00


Cable Tie Guns & TyWrap Guns

NEW LOW PRICES


Industrial Electric & Pneumatic Screwdrivers


Komax Blades


Komax Service


Schleuniger Blades


Artos Blades


Kodera Blades


 

 

                                      

MECAL

TOOL ORDERING INFORMATION

UP

 

 

When you order your applicator you want to be confident that it will do the job you expect. It follows therefore that the more information you can give us at the time of ordering, the fewer the potential problems. We have created a short checklist with some notes to help with applicator ordering.
A standard Mecal ordering form is also available. Order Form.pdf

 

  IDEAL MINIMUM
A length of crimp terminals

Please note the terminals should be well packed so they aren't damaged in transit. Most terminals can  be gently wound into a loose ring and preferably packed in a small box rather than a bag.

200 terminals

100 terminals

Wire

Make sure all sizes that you are, or will be, crimping are included. Mecal will only allow for the sizes given or stated. It is not absolutely necessary to supply the wire already cut and stripped.

 30 lengths 200mm long correctly stripped both ends

wire sizes given in  mm² or awg

If no wire is available, a list of wire sizes to process (Mecal will use their own standard wire sizes)
Housings (if used)

If no housings are available, it is difficult to guarantee the terminal will fit.

5 empty housings

Weather seals (if used)

If seals are being processed, it is essential to supply samples

100 seals 30 seals
Crimp make, part number & specification

If no details are available, Mecal will manufacture from experience. If the part number is recognised by Mecal, this can reduce manufacturing times

Manufacturers data sheets giving part number, crimp heights and widths

 

Finished sample  5 finished samples made to specification  
Additional Information Bench or Automatic?
Press shut height & stroke?
Side Feed  / End feed?
Mechanical feed / Pneumatic?
Feed on up / down stroke?
Pads / continuous regulation?
Carrier strip to be cut?
Used with a stripper unit?
Cross sections needed?
Spare parts needed?
Capability study needed?